Transport and shipping

Removing the dust cover

1. Open the dust cover fully.
2. Hold both sides near the bottom of the cover.
3. Carefully pull the cover upwards out of the hinge sockets.

Transporting the turntable

1. Lock the tonearm clamp.
2. Switch off the turntable and unplug the power adapter from the mains socket.
3. Disconnect all cables from the turntable.
4. Fit the guard over the stylus.
5. Hold the turntable securely from underneath when transporting it.
6. Adjust tracking force and anti-skating as necessary when setting up the device again.

Packing for transport or shipping

!Caution

Use the original packaging whenever possible. It offers the best protection, especially when shipping the device for repair. Use sufficiently sturdy and protective packaging to prevent transport damage.

If the original packaging is no longer available:

1. Wrap the parts in bubble wrap or similarly protective material.
2. Remove the dust cover and wrap it carefully.
3. Carefully remove the platter and mat and wrap both. Do not roll or fold the mat.
4. Fit the stylus guard. Remove the headshell with cartridge and the counterweight from the tonearm, and carefully wrap these parts.
5. Lock the tonearm clamp and secure it in place with a little adhesive tape.
6. Carefully wrap the turntable.