Skip to content

Safety information

Introduction

The following safety and operating instructions will help you use the PLATINUM Signature easily and safely.

  • Read these safety instructions and the operating manual before using the device.
  • Keep the documents in a suitable, accessible place.
  • If you pass the device on to someone else, also provide these documents.
  • Failure to follow the instructions may result in serious injury and damage to the device.
  • The manufacturer accepts no liability for damage caused by failure to follow the instructions.

Intended use

The device is intended exclusively for private use and is not suitable for commercial use. Only use it as described in this operating manual. Further information is available at sonoro.com.

Any other use is prohibited. The manufacturer accepts no liability for damage caused by improper use.

Children and people with limited perception

  • Do not leave the device unattended or use it when children or people who cannot assess the risks are nearby.
  • People, including children, who cannot use the device safely because of their physical, sensory or mental abilities or a lack of experience or knowledge may only use it under the supervision or instruction of a responsible person. Keep the device out of their reach.
  • Packaging materials are not toys. There is a risk of suffocation.

Power supply

Warning: Risk of electric shock

The device is powered by electricity. Follow these instructions to prevent electric shock, fire and damage.

  • Never touch the mains plug with wet hands.
  • Always pull directly on the plug when unplugging it from the socket. Never pull on the cable, as this may damage it.
  • The socket and mains plug must remain freely accessible at all times so that you can immediately disconnect the device from the mains in an emergency.
  • Make sure the power cable is not bent, pinched or run over. Route it so that it does not create a trip hazard and cannot be reached by children.
  • Keep the device away from rain, moisture and heat sources.
  • Only operate the device if the mains voltage indicated on its rating plate and power adapter matches the voltage of your socket. Incorrect voltage may destroy the device.
  • Only use the supplied power adapter, or the one specified in this operating manual, and its power cable.
  • To prevent fire, disconnect the device completely from the mains if it will not be used for an extended period. To do this, unplug the mains plug from the socket.

Power supply markings

Marking Meaning
Class II Class II: Protection through double or reinforced insulation.
Alternating current Alternating current: Marking for the corresponding power supply.
Direct current Direct current: Marking for the corresponding power supply.

Transport and shipping

Improper transport or shipping may damage the device or a record left on it and cause malfunctions.

  • When transporting the device in a vehicle, stow it so that it does not endanger the occupants.
  • Protect the front, edges and corners from pressure and excessive loads. Do not tilt the device over its edges or corners or place it upside down.
  • Use the original packaging for transport or shipping whenever possible. Keep it for this purpose.
  • If the original packaging is no longer available, use a sufficiently large box and fill the empty spaces with suitable packing material, such as polystyrene.
  • Remove the record from the platter before transport or shipping.
  • Also follow the device-specific preparations under Transport and shipping.

Ambient conditions and positioning

Use the device in moderate climates and dry indoor rooms.

  • Protect the device from weather, moisture, high temperatures and strong sunlight. Do not use it outdoors.
  • Protect the device from liquids, splashing and dripping water. Do not place containers filled with liquid, such as vases, on or next to the device.
  • Do not use the device in areas with high humidity. Protect it from heavy soiling, such as grease splashes or unfiltered kitchen exhaust air.
  • Do not place the device on or immediately beside fire or heat sources, such as burning candles, hobs or heaters.
  • Place the device on a stable surface and protect it from strong mechanical vibrations.

Unpacking and initial setup

  • The rubber feet may stain certain surfaces. Use a suitable protective base if necessary.
  • Only use the media specified in this operating manual.
  • Follow the instructions for Preparation and positioning and the Power supply.

Faults

  • Do not attempt to repair a faulty device yourself.
  • Damaged mains plugs, power adapters or power cables must be replaced by the manufacturer or its customer service department to prevent electric shock.
  • If liquid has entered the device, or it has been dropped or otherwise damaged, it must be checked by an authorised dealer.
  • In these cases, disconnect the device from the mains and contact an authorised dealer or customer service as soon as possible.

Disposal at the end of service life

Crossed-out wheeled bin: do not dispose of with household waste

Devices bearing this marking must not be disposed of with household waste. Take the device to a collection point for the recycling of electrical and electronic equipment.

For disposal information, contact your local authority, local waste disposal company or the shop where you purchased the device. Proper disposal protects the environment and your health.

Batteries and rechargeable batteries may contain toxic heavy metals and must not be disposed of with household waste either. Take any batteries requiring disposal to a municipal collection point or have them disposed of by a specialist company.