Preparation and positioning

The PLATINUM Signature must be assembled before first use.

Do not connect the turntable to a mains socket using the power adapter until assembly is complete.

Initially leave the stylus guard fitted during assembly. Remove it only at the specified assembly step.

The stylus is a high-precision component. Do not touch it with your fingers or let it drop onto the record, as this may damage it.

Removing the transport restraint

Remove the cable tie securing the tonearm.

Place the PLATINUM Signature on a level, stable surface.
If the surface is uneven, adjust each foot individually: loosen the locknut and turn the foot to the required height.
Then tighten the locknut again.