Skip to content

Fitting and using the dust cover

Note

The dust cover protects the turntable's delicate components. Keep it closed when the device is not in use.

  • Do not open or close the cover while a record is playing.
  • Take care not to trap your fingers when opening and closing it.
  • Do not place anything on the dust cover.

Fitting the dust cover

  1. Align the hinges with the holders on the dust cover and insert them.
  2. Insert the hinges fully into the hinge sockets on the rear of the turntable.
Fit the hinges to the dust cover
1 · Fit the hinges
Insert the dust cover hinges into the sockets on the device
2 · Fit the dust cover

Opening the dust cover

  1. Hold the front edge and carefully raise the cover fully to its stop.
  2. The cover stays open in this position.
Carefully raise the dust cover by its front edge

Closing the dust cover

Carefully lower the dust cover until it is closed.