Balancing the tonearm

Initially attaching the anti-skating weight

Place the loop of the anti-skating weight over the guide shaft in the frontmost groove, then pass the thread through the eye of the guide bracket.

Positioning the tonearm

1. Release the tonearm clamp.

2. Hold the headshell with your finger and move the tonearm over the platter.

3. Adjust the counterweight so that the tonearm floats parallel to the platter.

✓ Correct

× Incorrect

× Incorrect

4. Return the tonearm to its original position.
5. Lock the tonearm clamp.

Set the final position of the anti-skating weight in the next step.