Replacing the drive belt

The drive belt wears and may eventually break. Replace a worn or broken belt. A replacement belt is available from your dealer or customer service.

Removing the old belt

1. Switch off the turntable and connected audio device. Unplug the power adapter from the socket.
2. Remove the platter mat.
3. Turn the platter until the motor pulley is visible through the circular hole.
4. Remove the drive belt from the motor pulley.

Renewing the belt

1. Insert your finger and thumb into the round holes in the platter and lift it up.
2. Turn the platter over and remove the old belt.
3. Fit the new belt around the inner circle of the inverted platter.

Complete assembly as described under Fitting the drive belt.