Skip to content

Cleaning the device and stylus

Fitting the stylus guard

Hold the guard at the front and rear, align it with the front of the cartridge and slowly raise it until it covers the stylus.

Fit the stylus guard to the cartridge

Cleaning the turntable and dust cover

  • Use a soft, dry cloth.
  • For stubborn dirt, use a slightly damp cloth. Then dry the device and cover with a soft, dry cloth.
  • Do not use chemical solutions such as alcohol, benzine or paint thinner. These may damage the surface.

Cleaning the stylus

Note

Styli are precision components. Handle them carefully to avoid bending or damage. A bent cantilever or damaged stylus cannot follow the groove correctly and may damage the record or cause malfunctions.

Do not clean the stylus with thinner or other chemicals.

If heavily soiled, use a small brush, which is not included. Move the brush from back to front.

Clean the stylus with a small brush from back to front