Transport and shipping

Removing the dust cover

1. Open the dust cover fully.
2. Hold the cover on both sides near its lower edge and carefully pull it upwards out of the sockets.

Transporting the device

1. Lock the tonearm clamp.
2. Switch off the turntable and unplug the power adapter from the mains socket.
3. Disconnect all cables from the turntable.
4. Fit the stylus guard.
5. When carrying the turntable, hold it securely from underneath.

Adjust tracking force and anti-skating as necessary when setting up the device again.

Packing for shipping

!Caution: Avoid transport damage

Use the original packaging wherever possible. It provides the best protection during transport or when returning the device for repair.

If the original packaging is no longer available:

1. Use bubble wrap or similarly protective material.
2. Remove the dust cover and wrap it carefully.
3. Carefully remove the platter and mat and wrap both.
4. Fit the stylus guard. Remove the headshell with cartridge and the counterweight from the tonearm, and carefully wrap these parts.
5. Lock the tonearm clamp and secure it with a little adhesive tape.
6. Carefully wrap the turntable.

Use sufficiently sturdy and protective packaging to prevent damage during transport or shipping.