Skip to content

Connecting the power supply

Once the device is positioned and all desired connections are made, you can connect the MEISTERSTÜCK 3 to the power supply.

Connect the power cable to the MEISTERSTÜCK 3

1. Connect the power cable

Fully insert the power cable into the AC power socket on the rear of the MEISTERSTÜCK 3.

Connect the mains plug to a socket

2. Insert the mains plug

Insert the mains plug into a suitable, easily accessible socket.

Use only the supplied power cable. Ensure that it is firmly connected to the device and the socket.
The socket must remain easily accessible at all times so that you can fully disconnect the device from the mains when necessary.
Before connecting the device, check the permitted mains voltage on the MEISTERSTÜCK 3 rating plate.

After connecting the power supply, the MEISTERSTÜCK 3 is ready to use and can be switched on.