Connecting speakers

Connect your speakers to the speaker terminals on the rear of the device. Ensure the correct assignment of right and left speakers and the correct polarity (+/-).

Preparing the banana plugs

Prepare the supplied banana plugs before connecting the speakers to the device.

Opening the cap

Unscrew the cap of the banana plug.

Inserting the cable

Insert the stripped speaker cable (strip approx. 10 mm) into the side opening.

Tightening the cap

Tighten the cap again so that the cable is securely fixed.

Positioning the speakers

Connect the right speaker to the RIGHT (R) terminals and the left speaker to the LEFT (L) terminals. Ensure that the positive (+) and negative (-) wires are connected identically on both speakers.

Connecting the banana plugs

Insert the prepared banana plugs fully into the speaker terminals on the rear of the device.

ℹ Reversed polarity can impair sound quality and stereo imaging.

⚠ Before connecting the speakers, read the General safety instructions, especially the information on safely handling electrical devices.