Skip to content

Sound settings

Use the Sound settings to adapt the device’s sound to your listening preferences, speakers and room acoustics.
ℹ The sliders on this page are for illustration only. Settings are adjusted directly on the device or in the Web Client.
ℹ The division into “Standard” and “Advanced” is solely intended to make this online manual easier to navigate. This presentation does not correspond to the device’s menu structure.

Opening the Sound settings

Open the settings menu and select:

Settings → Sound settings
Standard audio settings

Bass

Boosts or reduces low frequencies.

-120+12

Treble

Boosts or reduces high frequencies.

-120+12

Balance control

Changes the volume balance between the left and right channels.

L100R10

Adaptive loudness

Automatically boosts bass and treble at low volume to make the sound fuller and more lively. The effect is automatically reduced as the volume increases.

On Off

Volume limit

Limits the maximum volume.

0%100%
Audio system setup
Speaker configuration

2.0 system

Operation with two speakers and no subwoofer.

2.1 system

Operation with two speakers and one subwoofer.

2.2 system

Operation with two speakers and two subwoofers.

Output mode

Selects between Stereo and Mono (L+R).

Stereo Mono (L+R)

High-pass crossover

Determines whether the speakers operate with a high-pass filter.

12 dB/oct. Off

Only visible with a 2.1 or 2.2 system.

High-pass frequency

Sets the crossover frequency between the speakers and subwoofer.

40 Hz200 Hz

Only visible with a 2.1 or 2.2 system.

Subwoofer

Subwoofer mode

Selects between mixed output and left/right output.

Mixed Left / Right

Only visible with a 2.2 system and Output mode = Stereo.

Subwoofer level

Adjusts the volume of the connected subwoofer.

-12 dB0 dB+12 dB

Subwoofer L level

Adjusts the volume of the left subwoofer.

-12 dB0 dB+12 dB

Subwoofer R level

Adjusts the volume of the right subwoofer.

-12 dB0 dB+12 dB

Subwoofer crossover

Sets the slope of the low-pass filter for the subwoofer.

12 dB/oct. 24 dB/oct.

Subwoofer low-pass frequency

Sets the highest frequency reproduced by the subwoofer.

40 Hz200 Hz
Speaker selection

Standard

Neutral speaker selection for general speakers.

sonoro speakers

Optimised presets for sonoro speakers.

  • ORCHESTRA SLIM
  • ORCHESTRA SLIM (Gen. 2)
  • ORCHESTRA
  • ORCHESTRA (Gen. 2)
  • GRAND ORCHESTRA
  • ORCHESTRA Shaped Signature

Dynamic Bass EQ

Optimises bass reproduction according to the speaker and volume.

On Off
EQ mode

Standard

Displays the basic audio settings.

Advanced

Enables additional settings for the parametric EQ.

Parametric EQ

Stereo EQ

Enables a shared EQ setting for the left and right channels. Stereo EQ is enabled by default.

Individual EQ

Enables separate EQ settings for the left and right channels.

Stereo parametric EQ
EQ 1 (Low Shelf)50 Hz, 0 dB, Q 0.707 (fixed)
EQ 2 (bell)100 Hz, 0 dB, Q 0.707
EQ 3 (bell)500 Hz, 0 dB, Q 0.707
EQ 4 (bell)1 kHz, 0 dB, Q 0.707
EQ 5 (bell)2 kHz, 0 dB, Q 0.707
EQ 6 (bell)4 kHz, 0 dB, Q 0.707
EQ 7 (High Shelf)8 kHz, 0 dB, Q 0.707 (fixed)
Copy EQ

Copy EQ

Copies EQ settings between Stereo EQ, the left channel and the right channel.

  • From Stereo to Left / Right
  • From Left to Right
  • From Left to Stereo
Balance control

Balance control

Changes the volume balance between the left and right channels.

L100R10
Volume limit

Volume limit

Limits the maximum volume.

0%100%
Audio system setup
Speaker configuration

2.0 system

Operation with two speakers and no subwoofer.

2.1 system

Operation with two speakers and one subwoofer.

2.2 system

Operation with two speakers and two subwoofers.

Output mode

Selects between Stereo and Mono (L+R).

Stereo Mono (L+R)

High-pass crossover

Determines whether the speakers operate with a high-pass filter.

12 dB/oct. Off

Only visible with a 2.1 or 2.2 system.

High-pass frequency

Sets the crossover frequency between the speakers and subwoofer.

40 Hz200 Hz

Only visible with a 2.1 or 2.2 system.

Subwoofer

Subwoofer mode

Selects between mixed output and left/right output.

Mixed Left / Right

Only visible with a 2.2 system and Output mode = Stereo.

Subwoofer level

Adjusts the volume of the connected subwoofer.

-12 dB0 dB+12 dB

Subwoofer L level

Adjusts the volume of the left subwoofer.

-12 dB0 dB+12 dB

Subwoofer R level

Adjusts the volume of the right subwoofer.

-12 dB0 dB+12 dB

Subwoofer crossover

Sets the slope of the low-pass filter for the subwoofer.

2nd-order 4th-order

Subwoofer low-pass frequency

Sets the highest frequency reproduced by the subwoofer.

40 Hz200 Hz
Speaker selection

Standard

Neutral speaker selection for general speakers.

sonoro speakers

Optimised presets for sonoro speakers.

  • ORCHESTRA SLIM
  • ORCHESTRA SLIM (Gen. 2)
  • ORCHESTRA
  • ORCHESTRA (Gen. 2)
  • GRAND ORCHESTRA
  • ORCHESTRA Shaped Signature

Dynamic Bass EQ

Optimises bass reproduction according to the speaker and volume.

On Off
EQ mode

Standard

Returns to the basic audio settings.

Advanced

Remains in advanced mode with parametric EQ.