Skip to content

Positioning the device

Before positioning the device, read the information under General safety instructions.

Place the device only in dry indoor rooms and avoid direct heat sources, moisture, strong sunlight and areas with insufficient ventilation.

Ensure that the ventilation openings are not covered and that there is enough space around the device for air circulation.

Unpacking the device

  • Carefully unpack the device and all included parts.
  • Check the device and all included parts for visible damage.
  • Check that all items are included.

→ See Package contents.

  • If possible, keep the packaging so that you can safely transport or ship the device later.
ℹ If any parts are missing or damaged, contact your dealer or sonoro customer service: sonoro.com/support

Choosing a suitable location

  • Place the device only on a stable, level surface capable of supporting its weight.
  • Protect the device from strong mechanical shocks.
  • Maintain a minimum distance of 10 cm from the rear wall and other objects.
  • Do not place objects filled with liquid on the device.
  • Do not place the device directly next to radiators, storage heaters, stoves or other heat sources.
  • The permissible ambient temperature is +10 °C to +40 °C.

→ Further information can be found under General safety instructions.

Wall mounting

Alternatively, the sonoro STREAMER can be mounted on a suitable wall.

  • Use only suitable mounting hardware.
  • The mounting wall must be load-bearing and made of non-combustible material.
  • Maintain a minimum distance of 10 cm from adjacent surfaces all around the device.
  • Ensure sufficient air circulation.
  • Do not mount the device directly above heat sources or other devices.

→ Information about the wall mounting points can be found under Device underside.

→ Also follow the instructions in the “Wall mounting” section under General safety instructions.