Auracast

With Auracast, you can transmit the device's audio wirelessly. Compatible Auracast receivers can receive the broadcast.

Open Auracast

Open the Home menu and select:

Home → Auracast

Auracast Broadcast

Select Start Auracast broadcast to open the broadcast function.

Start broadcast

Starts the Auracast broadcast.

Streaming setup

This function is currently unavailable.

High quality broadcast

Default setting: On

Public broadcast

Default setting: On

Private broadcast

Default setting: Off

Password

Password: 0000

ℹ The current software version supports Start Auracast broadcast. Additional settings are not yet fully implemented.

Start and stop the broadcast

1. Briefly press the Auracast button to start the BMS broadcast.
2. A message appears on the display indicating that the Auracast broadcast is starting. The device name is used as the broadcast name.
3. While the broadcast is active, the BMS symbol appears in the status display.

This symbol is displayed when the Auracast broadcast is active.

While a broadcast is active, briefly press the Auracast button again to stop the broadcast. A corresponding message appears on the display.

ℹ Switching the device on or off stops an active BMS broadcast.

Press and hold the Auracast button to open the Auracast context menu. This is equivalent to opening Auracast via the Home menu.