Skip to content

Status LED

The current operating state of the sonoro VIBES L device is indicated by the status LED. The color and illumination behavior of the LED provide information about the respective device status.

Status
Definition
Status LED off (Off)
The device is switched off (standby) and is not charging.
Status LED orange (Orange)
The sonoro VIBES L speaker is charging.

If the speaker is charging and operating at the same time, the orange status LED lights up only for 10 seconds. After that, the status LED switches to the respective status or operating mode. If the sonoro VIBES L is used in mains operation and the battery is fully charged, the status LED remains in the operating mode display.
(Flashing)
The speaker is in operation and the battery level of the sonoro VIBES L is low (<20%). The status LED flashes orange for 10 seconds at one-minute intervals.
(Flashing)
The sonoro VIBES L is receiving a software update or is being reset.
Status LED green (Green)
The sonoro VIBES L is fully charged, still connected to the power supply, and is in standby mode.
Status LED red (Red)
There is a malfunction while charging the sonoro VIBES L.
(Flashing)
The sonoro VIBES L is overheated or another issue is present.
Status LED white (White)
The sonoro VIBES L is switched on and functioning properly.
(Flashing)
The sonoro VIBES L has been switched on and is starting up. Once the startup process is complete, the status LED lights up continuously white.
Status LED blue (Blue)
The sonoro VIBES L is connected to a device in Bluetooth mode. If the connection is lost, the status LED flashes again.
(Flashing)
The sonoro VIBES L is in Bluetooth pairing mode and ready to establish a connection with a device via Bluetooth.
Status LED light blue (Light blue)
Auracast BMS (transmitter): The sonoro VIBES L is in broadcast mode (active Bluetooth connection and ongoing music playback on the sonoro VIBES L).
Status LED violet (Violet)
Auracast BMR (receiver): The sonoro VIBES L functions as an Auracast receiver.
(Flashing)
Auracast BMR: The LED flashes violet while searching for available transmissions.
Status LED light green (Light green)
EQ-BOOST is active.
Status LED pink (Pink)
EQ-BOOST is inactive.