Skip to content

Connecting the amplifier

Notice

Switch off the amplifier before connecting the speakers to prevent short circuits.

Connect the right and left channels

  1. Connect the right speaker to the amplifier's right channel.
  2. Connect the left speaker to the amplifier's left channel.
  3. Observe the correct polarity: connect + to + and − to −.
Connecting the amplifier

Prevent short circuits

  • The bare wires of the speaker cables must not touch each other.
  • The bare wires must not touch the backs of the speakers or their screws.
Stripped ends of a speaker cable

Check the connections

Before use, check that all cables are connected correctly and securely. Check the positive and negative terminals on both speakers again. See Technical data for load impedance and recommended amplifier power.

If there is no sound or playback is faulty, follow Troubleshooting.